f65b126433
Move custom.list to /hosts/custom.list
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-11-13 21:37:41 +01:00
758ace57c0
Check for valid OS via IPv4 and IPv6 ( #5305 )
2023-11-04 08:02:38 +01:00
480a8c8d7f
Remove idn2 as punycode conversion is handled by FTL
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-10-31 21:02:26 +01:00
842a9d7778
Address review comments
...
Signed-off-by: DL6ER <dl6er@dl6er.de >
2023-10-22 08:33:56 +02:00
369ccf13a8
Move FTL binary availability check after the supported OS check
...
Signed-off-by: DL6ER <dl6er@dl6er.de >
2023-10-21 21:40:21 +02:00
38ecc1693f
Further simplify the ARMv6 test
...
Signed-off-by: DL6ER <dl6er@dl6er.de >
2023-10-21 20:39:32 +02:00
30bfc7cc9f
Add binutils tot he OS check dependencies as we need it to check if the local system is abel to run any of our precompiled FTL binaries
...
Signed-off-by: DL6ER <dl6er@dl6er.de >
2023-10-21 19:15:10 +02:00
45687d675b
Fix the binary detection for ARMv6 and simplify the router overall
...
Signed-off-by: DL6ER <dl6er@dl6er.de >
2023-10-21 19:13:45 +02:00
ca7836bf71
Remove now obsolete GLIBC version check
...
Signed-off-by: DL6ER <dl6er@dl6er.de >
2023-10-21 19:05:45 +02:00
8bcd1d4c54
*BREAKING* Drop support for ancient ARMv4 and ARMv5 ( #5445 )
2023-10-21 18:27:42 +02:00
6cf39d9b92
Remove temp dir created when downloading FTL ( #5429 )
2023-10-20 09:25:10 +02:00
c571d8d37d
Drop support for ancient ARMv4 and ARMv5, the Debian binaries turn out to cause unresolvable SIGFPE on ARMv6 and lower. Fortunately, we can still use the Alpine binaries on all Raspberry Pi models (even the oldest ones)
...
Signed-off-by: DL6ER <dl6er@dl6er.de >
2023-10-19 22:13:44 +02:00
d77dbf736c
Logrotate config file needs to be owned by root
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-10-18 22:09:38 +02:00
123ba1f154
Remove temp dir created when downloading FTL
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-10-15 22:15:11 +02:00
2841a33b81
Set owner of gravity output files to pihole ( #5419 )
2023-10-14 19:40:27 +02:00
46ff257344
Remove Chronometer
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-10-12 13:44:51 +02:00
2061f3a70e
Set owner/permissions at the right place
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-10-11 21:22:12 +02:00
22863845a0
Set owner/group of /etc/pihole to pihole
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-10-09 22:05:01 +02:00
679aab10d0
Run gravity as user pihole
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-10-09 21:53:37 +02:00
7886dc0172
adminlte->web
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-10-08 14:09:47 +01:00
885b626a68
Some unrelated spelling mistakes that spellcheck is grumbling about
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-10-04 16:22:01 +01:00
c33963b250
Check for valid OS via IPv4 and IPv6
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-08-27 15:11:47 +02:00
3c693c1da5
Apply suggestions from code review
...
Co-authored-by: DL6ER <dl6er@dl6er.de >
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-08-06 12:04:55 +02:00
5ae0405446
Ensure pihole-FTL can write custom.list
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-08-03 20:46:01 +02:00
d637d2a7a5
Simplify nested if statements.
...
Co-authored-by: yubiuser <ckoenig@posteo.de >
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-06-18 21:10:06 +01:00
001f2012a2
Update automated install/basic-install.sh
...
Co-authored-by: RD WebDesign <github@rdwebdesign.com.br >
Signed-off-by: Adam Warner <github@adamwarner.co.uk >
2023-06-18 15:45:30 +01:00
c39cb8cfe0
Escape the sed command for removing a line in fed/centos lighttpd.conf
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-06-18 15:45:30 +01:00
d5013bfd6c
Add code to remove old lighttpd config files left over from v5. Web config is all dealt with by FTL now
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-06-18 15:45:30 +01:00
e0d7e5df85
Install binutils as installer deps (needed to pick correct architecture for FTL)
...
Signed-off-by: DL6ER <dl6er@dl6er.de >
2023-06-09 19:30:28 +02:00
913be6c349
Print detected CPU arch
...
Signed-off-by: DL6ER <dl6er@dl6er.de >
2023-06-09 19:01:14 +02:00
1c4e58efe3
Use exact architecture matching binaries where appropriate
...
Signed-off-by: DL6ER <dl6er@dl6er.de >
2023-06-09 15:53:02 +02:00
9c27e4766d
Decide which FTL architecture to pick by by installed architectures rather than by detected processor (this may be wrong in an emulated Docker environment)
...
Signed-off-by: DL6ER <dl6er@dl6er.de >
2023-06-08 22:17:14 +02:00
8bf4ab0cd6
Remove option to set static IP address if DHCPCD is installed
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-06-04 22:59:44 +02:00
366345e87e
Fix no_installs
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-06-04 20:31:48 +02:00
667418c71d
Use new FTL binary names
...
Signed-off-by: DL6ER <dl6er@dl6er.de >
2023-06-04 20:02:38 +02:00
7da57c6acd
Don't check and install old FTL config file
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-06-02 00:08:50 +02:00
792b0d419b
Test fixes
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-06-01 19:29:47 +01:00
7351a4d3b1
Merge branch 'development' into development-v6
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-06-01 15:45:05 +02:00
f7b9d70054
Remove man page for pihole-FTL
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-05-30 21:39:10 +02:00
7cbe713873
REVISIT: Don't rely on existence of setupVars.conf
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-05-27 11:51:16 +01:00
0e8f285f4f
Always assume that the web interface will be installed.
...
We could revist this again in future if we decide that there should still be a choice to install the interface or not
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-05-27 11:51:16 +01:00
0568a69d83
Use WEBPORT instead of PRIVACY_LEVEL to set the web port...
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-05-27 11:51:16 +01:00
b8acccde90
Update comments on the move of /etc/dnsmasq.old -> /etc/dnsmasq.old to better reflect why we are doing it
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-05-27 11:51:16 +01:00
e3ffec5762
Change when old configs are removed
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-05-27 11:51:15 +01:00
0e558e4c36
Remove some code that installs the blockpage/sets up web directories
...
Remove some code that disables dnsmasq if it is running
Create dnsmasq.d directory if it does not exist
2023-05-27 11:51:15 +01:00
31f16510e2
Clear out some no longer needed ftl/dnsmasq config code
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-05-27 11:51:15 +01:00
d2d1195928
Needs tweaking, offer chance to change web interface port
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-05-27 11:51:15 +01:00
31ee15200d
gut the install script of references to web server/lighttpd
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk >
2023-05-27 11:51:15 +01:00
b74c6d5120
Add support for RISC-V 64-bit installs
...
Signed-off-by: MichaIng <micha@dietpi.com >
2023-05-03 20:52:28 +02:00
c96463bda2
Fix getting 'privacylevel'
...
Signed-off-by: Christian König <ckoenig@posteo.de >
2023-03-22 23:00:10 +01:00
Christian König