Merge branch 'master' into unsupported/binary

Reviewed-on: #1

advanced/Scripts/piholeCheckout.sh

@@ -41,6 +41,22 @@ warning1() {
 }
 
 checkout() {
+
+    local skipFTL additionalFlag
+    skipFTL=false
+    # Check arguments
+    for var in "$@"; do
+        case "$var" in
+            "--skipFTL") skipFTL=true ;;
+        esac
+    done
+
+    if [ "${skipFTL}" == true ]; then
+        additionalFlag="--skipFTL"
+    else
+        additionalFlag=""
+    fi
+
     local corebranches
     local webbranches
 
@@ -235,7 +251,7 @@ checkout() {
     # Force updating everything
     if [[  ! "${1}" == "web" && ! "${1}" == "ftl" ]]; then
         echo -e "  ${INFO} Running installer to upgrade your installation"
-        if "${PI_HOLE_FILES_DIR}/automated install/basic-install.sh" --unattended; then
+        if "${PI_HOLE_FILES_DIR}/automated install/basic-install.sh" --unattended ${additionalFlag}; then
             exit 0
         else
             echo -e "  ${COL_RED} Error: Unable to complete update, please contact support${COL_NC}"

advanced/Scripts/update.sh

@@ -149,31 +149,37 @@ main() {
         echo -e "  ${INFO} Web Interface:\\t${COL_GREEN}up to date${COL_NC}"
     fi
 
-    local funcOutput
-    funcOutput=$(get_binary_name) #Store output of get_binary_name here
-    local binary
-    binary="pihole-FTL${funcOutput##*pihole-FTL}" #binary name will be the last line of the output of get_binary_name (it always begins with pihole-FTL)
+    # Allow the user to skip this check if they are using a self-compiled FTL binary from an unsupported architecture
+    if [ "${skipFTL}" != true ]; then
+        local funcOutput
+        funcOutput=$(get_binary_name) #Store output of get_binary_name here
+        local binary
+        binary="pihole-FTL${funcOutput##*pihole-FTL}" #binary name will be the last line of the output of get_binary_name (it always begins with pihole-FTL)
 
-    if FTLcheckUpdate "${binary}" &>/dev/null; then
-        FTL_update=true
-        echo -e "  ${INFO} FTL:\\t\\t${COL_YELLOW}update available${COL_NC}"
+        if FTLcheckUpdate "${binary}" &>/dev/null; then
+            FTL_update=true
+            echo -e "  ${INFO} FTL:\\t\\t${COL_YELLOW}update available${COL_NC}"
+        else
+            case $? in
+                1)
+                    echo -e "  ${INFO} FTL:\\t\\t${COL_GREEN}up to date${COL_NC}"
+                    ;;
+                2)
+                    echo -e "  ${INFO} FTL:\\t\\t${COL_RED}Branch is not available.${COL_NC}\\n\\t\\t\\tUse ${COL_GREEN}pihole checkout ftl [branchname]${COL_NC} to switch to a valid branch."
+                    exit 1
+                    ;;
+                3)
+                    echo -e "  ${INFO} FTL:\\t\\t${COL_RED}Something has gone wrong, cannot reach download server${COL_NC}"
+                    exit 1
+                    ;;
+                *)
+                    echo -e "  ${INFO} FTL:\\t\\t${COL_RED}Something has gone wrong, contact support${COL_NC}"
+                    exit 1
+            esac
+            FTL_update=false
+        fi
     else
-        case $? in
-            1)
-                echo -e "  ${INFO} FTL:\\t\\t${COL_GREEN}up to date${COL_NC}"
-                ;;
-            2)
-                echo -e "  ${INFO} FTL:\\t\\t${COL_RED}Branch is not available.${COL_NC}\\n\\t\\t\\tUse ${COL_GREEN}pihole checkout ftl [branchname]${COL_NC} to switch to a valid branch."
-                exit 1
-                ;;
-            3)
-                echo -e "  ${INFO} FTL:\\t\\t${COL_RED}Something has gone wrong, cannot reach download server${COL_NC}"
-                exit 1
-                ;;
-            *)
-                echo -e "  ${INFO} FTL:\\t\\t${COL_RED}Something has gone wrong, contact support${COL_NC}"
-                exit 1
-        esac
+        echo -e "  ${INFO} FTL:\\t\\t${COL_YELLOW}--skipFTL set - update check skipped${COL_NC}"
         FTL_update=false
     fi
 
@@ -222,7 +228,14 @@ main() {
     fi
 
     if [[ "${FTL_update}" == true || "${core_update}" == true ]]; then
-        ${PI_HOLE_FILES_DIR}/automated\ install/basic-install.sh --repair --unattended || \
+        local addionalFlag
+
+        if [[ ${skipFTL} == true ]]; then
+             addionalFlag="--skipFTL"
+        else
+             addionalFlag=""
+        fi
+        ${PI_HOLE_FILES_DIR}/automated\ install/basic-install.sh --repair --unattended ${addionalFlag} || \
             echo -e "${basicError}" && exit 1
     fi
 
@@ -242,8 +255,15 @@ main() {
     exit 0
 }
 
-if [[ "$1" == "--check-only" ]]; then
-    CHECK_ONLY=true
-fi
+CHECK_ONLY=false
+skipFTL=false
+
+# Check arguments
+for var in "$@"; do
+    case "$var" in
+    "--check-only") CHECK_ONLY=true ;;
+    "--skipFTL") skipFTL=true ;;
+    esac
+done
 
 main

automated install/basic-install.sh

@@ -188,14 +188,27 @@ PIHOLE_META_DEPS_APK=(
 # The runUnattended flag is one example of this
 repair=false
 runUnattended=false
+skipFTL=false
 # Check arguments for the undocumented flags
 for var in "$@"; do
     case "${var}" in
     "--repair") repair=true ;;
     "--unattended") runUnattended=true ;;
+    "--skipFTL") skipFTL=true ;;
     esac
 done
 
+if [[ "${runUnattended}" == true ]]; then
+    # In order to run an unattended setup, a pre-seeded /etc/pihole/pihole.toml must exist
+    if [[ ! -f "${PI_HOLE_CONFIG_DIR}/pihole.toml" ]]; then
+        printf "  %b Error: \"%s\" not found. Cannot run unattended setup\\n" "${CROSS}" "${PI_HOLE_CONFIG_DIR}/pihole.toml"
+        exit 1
+    fi
+    printf "  %b Performing unattended setup, no dialogs will be displayed\\n" "${INFO}"
+    # also disable debconf-apt-progress dialogs
+    export DEBIAN_FRONTEND="noninteractive"
+fi
+
 # If the color table file exists,
 if [[ -f "${coltable}" ]]; then
     # source it
@@ -2322,21 +2335,18 @@ main() {
 
     # Check if there is a usable FTL binary available on this architecture - do
     # this early on as FTL is a hard dependency for Pi-hole
-    local funcOutput
-    funcOutput=$(get_binary_name) #Store output of get_binary_name here
-    # Abort early if this processor is not supported (get_binary_name returns empty string)
-    if [[ "${funcOutput}" == "" ]]; then
-        printf "  %b Upgrade/install aborted\\n" "${CROSS}" "${DISTRO_NAME}"
-        exit 1
-    fi
-
-    if [[ "${fresh_install}" == false ]]; then
-        # if it's running unattended,
-        if [[ "${runUnattended}" == true ]]; then
-            printf "  %b Performing unattended setup, no dialogs will be displayed\\n" "${INFO}"
-            # also disable debconf-apt-progress dialogs
-            export DEBIAN_FRONTEND="noninteractive"
+    # Allow the user to skip this check if they are using a self-compiled FTL binary from an unsupported architecture
+    if [ "${skipFTL}" != true ]; then
+        # Get the binary name for the current architecture
+        local funcOutput
+        funcOutput=$(get_binary_name) #Store output of get_binary_name here
+        # Abort early if this processor is not supported (get_binary_name returns empty string)
+        if [[ "${funcOutput}" == "" ]]; then
+            printf "  %b Upgrade/install aborted\\n" "${CROSS}" "${DISTRO_NAME}"
+            exit 1
         fi
+    else
+        printf "  %b %b--skipFTL set - skipping architecture check%b\\n" "${INFO}" "${COL_YELLOW}" "${COL_NC}"
     fi
 
     if [[ "${fresh_install}" == true ]]; then
@@ -2369,13 +2379,18 @@ main() {
     create_pihole_user
 
     # Download and install FTL
-    local binary
-    binary="pihole-FTL${funcOutput##*pihole-FTL}" #binary name will be the last line of the output of get_binary_name (it always begins with pihole-FTL)
-    local theRest
-    theRest="${funcOutput%pihole-FTL*}" # Print the rest of get_binary_name's output to display (cut out from first instance of "pihole-FTL")
-    if ! FTLdetect "${binary}" "${theRest}"; then
-        printf "  %b FTL Engine not installed\\n" "${CROSS}"
-        exit 1
+    # Allow the user to skip this check if they are using a self-compiled FTL binary from an unsupported architecture
+    if [ "${skipFTL}" != true ]; then
+        local binary
+        binary="pihole-FTL${funcOutput##*pihole-FTL}" #binary name will be the last line of the output of get_binary_name (it always begins with pihole-FTL)
+        local theRest
+        theRest="${funcOutput%pihole-FTL*}" # Print the rest of get_binary_name's output to display (cut out from first instance of "pihole-FTL")
+        if ! FTLdetect "${binary}" "${theRest}"; then
+            printf "  %b FTL Engine not installed\\n" "${CROSS}"
+            exit 1
+        fi
+    else
+        printf "  %b %b--skipFTL set - skipping FTL binary installation%b\\n" "${INFO}" "${COL_YELLOW}" "${COL_NC}"
     fi
 
     # Install and log everything to a file

pihole

@@ -125,7 +125,22 @@ repairPiholeFunc() {
   if [ -n "${DOCKER_VERSION}" ]; then
     unsupportedFunc
   else
-    /etc/.pihole/automated\ install/basic-install.sh --repair
+    local skipFTL additionalFlag
+    skipFTL=false
+    # Check arguments
+    for var in "$@"; do
+        case "$var" in
+            "--skipFTL") skipFTL=true ;;
+        esac
+    done
+
+    if [ "${skipFTL}" == true ]; then
+        additionalFlag="--skipFTL"
+    else
+        additionalFlag=""
+    fi
+
+    /etc/.pihole/automated\ install/basic-install.sh --repair ${additionalFlag}
     exit 0;
   fi
 }
@@ -601,7 +616,7 @@ case "${1}" in
   "-d" | "debug"                  ) debugFunc "$@";;
   "-f" | "flush"                  ) flushFunc "$@";;
   "-up" | "updatePihole"          ) updatePiholeFunc "$@";;
-  "-r"  | "repair"                ) repairPiholeFunc;;
+  "-r"  | "repair"                ) repairPiholeFunc "$@";;
   "-g" | "updateGravity"          ) updateGravityFunc "$@";;
   "-l" | "logging"                ) piholeLogging "$@";;
   "uninstall"                     ) uninstallFunc;;