v5.17.1 (#5295)

Signed-off-by: DL6ER <dl6er@dl6er.de>

.github/workflows/codeql-analysis.yml

@@ -25,7 +25,7 @@ jobs:
     steps:
     -
       name: Checkout repository
-      uses: actions/checkout@v3.3.0
+      uses: actions/checkout@v3.5.2
     # Initializes the CodeQL tools for scanning.
     -
       name: Initialize CodeQL

.github/workflows/stale.yml

@@ -4,23 +4,42 @@ on:
   schedule:
     - cron: '0 8 * * *'
   workflow_dispatch:
+  issue_comment:
+
+env:
+  stale_label: stale
 
 jobs:
-  stale:
-
+  stale_action:
+    if: github.event_name != 'issue_comment'
     runs-on: ubuntu-latest
     permissions:
       issues: write
 
     steps:
-      - uses: actions/stale@v7.0.0
+      - uses: actions/stale@v8.0.0
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           days-before-stale: 30
           days-before-close: 5
           stale-issue-message: 'This issue is stale because it has been open 30 days with no activity. Please comment or update this issue or it will be closed in 5 days.'
-          stale-issue-label: 'stale'
+          stale-issue-label: $stale_label
           exempt-issue-labels: 'Internal, Fixed in next release, Bug: Confirmed, Documentation Needed'
           exempt-all-issue-assignees: true
           operations-per-run: 300
           close-issue-reason: 'not_planned'
+
+  remove_stale: # trigger "stale" removal immediately when stale issues are commented on
+    if: github.event_name == 'issue_comment'
+    permissions:
+      contents: read #  for actions/checkout
+      issues: write #  to edit issues label
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3.5.2
+      - name: Remove 'stale' label
+        run: gh issue edit ${{ github.event.issue.number }} --remove-label $stale_label
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+

.github/workflows/stale_pr.yml

@@ -17,7 +17,7 @@ jobs:
       pull-requests: write
 
     steps:
-      - uses: actions/stale@v7.0.0
+      - uses: actions/stale@v8.0.0
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           # Do not automatically mark PR/issue as stale

.github/workflows/sync-back-to-dev.yml

@@ -5,13 +5,35 @@ on:
     branches:
       - master
 
+# The section is needed to drop the default write-all permissions for all jobs
+# that are granted on `push` event. By specifying any permission explicitly
+# all others are set to none. By using the principle of least privilege the damage a compromised
+# workflow can do (because of an injection or compromised third party tool or
+# action) is restricted. Adding labels to issues, commenting
+# on pull-requests, etc. may need additional permissions:
+#
+# Syntax for this section:
+# https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#permissions
+#
+# Reference for how to assign permissions on a job-by-job basis:
+# https://docs.github.com/en/actions/using-jobs/assigning-permissions-to-jobs
+#
+# Reference for available permissions that we can enable if needed:
+# https://docs.github.com/en/actions/security-guides/automatic-token-authentication#permissions-for-the-github_token
+permissions: {}
+
 jobs:
   sync-branches:
+    # The job needs to be able to pull the code and create a pull request.
+    permissions:
+      contents: read #  for actions/checkout
+      pull-requests: write #  to create pull request
+
     runs-on: ubuntu-latest
     name: Syncing branches
     steps:
       - name: Checkout
-        uses: actions/checkout@v3.3.0
+        uses: actions/checkout@v3.5.2
       - name: Opening pull request
         run: gh pr create -B development -H master --title 'Sync master back into development' --body 'Created by Github action' --label 'internal'
         env:

.github/workflows/test.yml

@@ -13,7 +13,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v3.3.0
+        uses: actions/checkout@v3.5.2
 
       - name: Check scripts in repository are executable
         run: |
@@ -53,19 +53,21 @@ jobs:
             debian_11,
             ubuntu_20,
             ubuntu_22,
+            ubuntu_23,
             centos_8,
             centos_9,
             fedora_36,
             fedora_37,
+            fedora_38,
           ]
     env:
       DISTRO: ${{matrix.distro}}
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v3.3.0
+        uses: actions/checkout@v3.5.2
 
       - name: Set up Python 3.10
-        uses: actions/setup-python@v4.5.0
+        uses: actions/setup-python@v4.6.1
         with:
           python-version: "3.10"
 

advanced/Scripts/piholeDebug.sh

@@ -66,6 +66,8 @@ RUN_DIRECTORY="/run"
 LOG_DIRECTORY="/var/log/pihole"
 WEB_SERVER_LOG_DIRECTORY="/var/log/lighttpd"
 WEB_SERVER_CONFIG_DIRECTORY="/etc/lighttpd"
+WEB_SERVER_CONFIG_DIRECTORY_FEDORA="${WEB_SERVER_CONFIG_DIRECTORY}/conf.d"
+WEB_SERVER_CONFIG_DIRECTORY_DEBIAN="${WEB_SERVER_CONFIG_DIRECTORY}/conf-enabled"
 HTML_DIRECTORY="/var/www/html"
 WEB_GIT_DIRECTORY="${HTML_DIRECTORY}/admin"
 SHM_DIRECTORY="/dev/shm"
@@ -77,6 +79,8 @@ PIHOLE_CRON_FILE="${CRON_D_DIRECTORY}/pihole"
 
 WEB_SERVER_CONFIG_FILE="${WEB_SERVER_CONFIG_DIRECTORY}/lighttpd.conf"
 WEB_SERVER_CUSTOM_CONFIG_FILE="${WEB_SERVER_CONFIG_DIRECTORY}/external.conf"
+WEB_SERVER_PIHOLE_CONFIG_FILE_DEBIAN="${WEB_SERVER_CONFIG_DIRECTORY_DEBIAN}/15-pihole-admin.conf"
+WEB_SERVER_PIHOLE_CONFIG_FILE_FEDORA="${WEB_SERVER_CONFIG_DIRECTORY_FEDORA}/pihole-admin.conf"
 
 PIHOLE_INSTALL_LOG_FILE="${PIHOLE_DIRECTORY}/install.log"
 PIHOLE_RAW_BLOCKLIST_FILES="${PIHOLE_DIRECTORY}/list.*"
@@ -140,6 +144,8 @@ PIHOLE_PROCESSES=( "lighttpd" "pihole-FTL" )
 REQUIRED_FILES=("${PIHOLE_CRON_FILE}"
 "${WEB_SERVER_CONFIG_FILE}"
 "${WEB_SERVER_CUSTOM_CONFIG_FILE}"
+"${WEB_SERVER_PIHOLE_CONFIG_FILE_DEBIAN}"
+"${WEB_SERVER_PIHOLE_CONFIG_FILE_FEDORA}"
 "${PIHOLE_INSTALL_LOG_FILE}"
 "${PIHOLE_RAW_BLOCKLIST_FILES}"
 "${PIHOLE_LOCAL_HOSTS_FILE}"
@@ -224,10 +230,8 @@ initialize_debug() {
 
 # This is a function for visually displaying the current test that is being run.
 # Accepts one variable: the name of what is being diagnosed
-# Colors do not show in the dasboard, but the icons do: [i], [✓], and [✗]
 echo_current_diagnostic() {
     # Colors are used for visually distinguishing each test in the output
-    # These colors do not show in the GUI, but the formatting will
     log_write "\\n${COL_PURPLE}*** [ DIAGNOSING ]:${COL_NC} ${1}"
 }
 
@@ -977,6 +981,20 @@ ftl_full_status(){
     fi
 }
 
+lighttpd_test_configuration(){
+    # let lighttpd test it's own configuration
+    local lighttpd_conf_test
+    echo_current_diagnostic "Lighttpd configuration test"
+    lighttpd_conf_test=$(lighttpd -tt -f /etc/lighttpd/lighttpd.conf)
+    if [ -z "${lighttpd_conf_test}" ]; then
+        # empty output
+        log_write "${TICK} ${COL_GREEN}No error in lighttpd configuration${COL_NC}"
+    else
+        log_write "${CROSS} ${COL_RED}Error in lighttpd configuration${COL_NC}"
+        log_write "   ${lighttpd_conf_test}"
+    fi
+}
+
 make_array_from_file() {
     local filename="${1}"
     # The second argument can put a limit on how many line should be read from the file
@@ -1069,10 +1087,13 @@ dir_check() {
         # check if exists first; if it does,
         if ls "${filename}" 1> /dev/null 2>&1; then
             # do nothing
-            :
+            true
+            return
         else
             # Otherwise, show an error
             log_write "${COL_RED}${directory} does not exist.${COL_NC}"
+            false
+            return
         fi
     done
 }
@@ -1080,6 +1101,19 @@ dir_check() {
 list_files_in_dir() {
     # Set the first argument passed to this function as a named variable for better readability
     local dir_to_parse="${1}"
+
+    # show files and sizes of some directories, don't print the file content (yet)
+    if [[ "${dir_to_parse}" == "${SHM_DIRECTORY}" ]]; then
+        # SHM file - we do not want to see the content, but we want to see the files and their sizes
+        log_write "$(ls -lh "${dir_to_parse}/")"
+    elif [[ "${dir_to_parse}" == "${WEB_SERVER_CONFIG_DIRECTORY_FEDORA}" ]]; then
+        # we want to see all files files in /etc/lighttpd/conf.d
+        log_write "$(ls -lh "${dir_to_parse}/" 2> /dev/null )"
+    elif [[ "${dir_to_parse}" == "${WEB_SERVER_CONFIG_DIRECTORY_DEBIAN}" ]]; then
+        # we want to see all files files in /etc/lighttpd/conf.d
+        log_write "$(ls -lh "${dir_to_parse}/"/ 2> /dev/null )"
+    fi
+
     # Store the files found in an array
     mapfile -t files_found < <(ls "${dir_to_parse}")
     # For each file in the array,
@@ -1095,11 +1129,8 @@ list_files_in_dir() {
             [[ "${dir_to_parse}/${each_file}" == "${PIHOLE_WEB_SERVER_ACCESS_LOG_FILE}" ]] || \
             [[ "${dir_to_parse}/${each_file}" == "${PIHOLE_LOG_GZIPS}" ]]; then
             :
-        elif [[ "${dir_to_parse}" == "${SHM_DIRECTORY}" ]]; then
-            # SHM file - we do not want to see the content, but we want to see the files and their sizes
-            log_write "$(ls -lhd "${dir_to_parse}"/"${each_file}")"
         elif [[ "${dir_to_parse}" == "${DNSMASQ_D_DIRECTORY}" ]]; then
-            # in case of the dnsmasq directory inlcuede all files in the debug output
+            # in case of the dnsmasq directory include all files in the debug output
             log_write "\\n${COL_GREEN}$(ls -lhd "${dir_to_parse}"/"${each_file}")${COL_NC}"
             make_array_from_file "${dir_to_parse}/${each_file}"
         else
@@ -1132,9 +1163,10 @@ show_content_of_files_in_dir() {
     # Set a local variable for better readability
     local directory="${1}"
     # Check if the directory exists
-    dir_check "${directory}"
-    # if it does, list the files in it
-    list_files_in_dir "${directory}"
+    if dir_check "${directory}"; then
+        # if it does, list the files in it
+        list_files_in_dir "${directory}"
+    fi
 }
 
 show_content_of_pihole_files() {
@@ -1142,6 +1174,8 @@ show_content_of_pihole_files() {
     show_content_of_files_in_dir "${PIHOLE_DIRECTORY}"
     show_content_of_files_in_dir "${DNSMASQ_D_DIRECTORY}"
     show_content_of_files_in_dir "${WEB_SERVER_CONFIG_DIRECTORY}"
+    show_content_of_files_in_dir "${WEB_SERVER_CONFIG_DIRECTORY_FEDORA}"
+    show_content_of_files_in_dir "${WEB_SERVER_CONFIG_DIRECTORY_DEBIAN}"
     show_content_of_files_in_dir "${CRON_D_DIRECTORY}"
     show_content_of_files_in_dir "${WEB_SERVER_LOG_DIRECTORY}"
     show_content_of_files_in_dir "${LOG_DIRECTORY}"
@@ -1496,6 +1530,7 @@ check_name_resolution
 check_dhcp_servers
 process_status
 ftl_full_status
+lighttpd_test_configuration
 parse_setup_vars
 check_x_headers
 analyze_ftl_db

advanced/Scripts/query.sh

@@ -30,33 +30,6 @@ gravityDBfile="${GRAVITYDB}"
 colfile="/opt/pihole/COL_TABLE"
 source "${colfile}"
 
-# Scan an array of files for matching strings
-scanList(){
-    # Escape full stops
-    local domain="${1}" esc_domain="${1//./\\.}" lists="${2}" list_type="${3:-}"
-
-    # Prevent grep from printing file path
-    cd "$piholeDir" || exit 1
-
-    # Prevent grep -i matching slowly: https://bit.ly/2xFXtUX
-    export LC_CTYPE=C
-
-    # /dev/null forces filename to be printed when only one list has been generated
-    case "${list_type}" in
-        "exact" ) grep -i -E -l "(^|(?<!#)\\s)${esc_domain}($|\\s|#)" ${lists} /dev/null 2>/dev/null;;
-        # Iterate through each regexp and check whether it matches the domainQuery
-        # If it does, print the matching regexp and continue looping
-        # Input 1 - regexps | Input 2 - domainQuery
-        "regex" )
-            for list in ${lists}; do
-                if [[ "${domain}" =~ ${list} ]]; then
-                    printf "%b\n" "${list}";
-                fi
-            done;;
-        *       ) grep -i "${esc_domain}" ${lists} /dev/null 2>/dev/null;;
-    esac
-}
-
 if [[ "${options}" == "-h" ]] || [[ "${options}" == "--help" ]]; then
     echo "Usage: pihole -q [option] <domain>
 Example: 'pihole -q -exact domain.com'
@@ -84,17 +57,32 @@ options=$(sed -E 's/ ?-(all|exact) ?//g' <<< "${options}")
 case "${options}" in
     ""             ) str="No domain specified";;
     *" "*          ) str="Unknown query option specified";;
-    *[![:ascii:]]* ) domainQuery=$(idn2 "${options}");;
-    *              ) domainQuery="${options}";;
+    *[![:ascii:]]* ) rawDomainQuery=$(idn2 "${options}");;
+    *              ) rawDomainQuery="${options}";;
 esac
 
+# convert the domain to lowercase
+domainQuery=$(echo "${rawDomainQuery}" | tr '[:upper:]' '[:lower:]')
+
 if [[ -n "${str:-}" ]]; then
     echo -e "${str}${COL_NC}\\nTry 'pihole -q --help' for more information."
     exit 1
 fi
 
+# Scan a domain again a list of RegEX
+scanRegExList(){
+    local domain="${1}" list="${2}"
+
+    for entry in ${list}; do
+        if [[ "${domain}" =~ ${entry} ]]; then
+            printf "%b\n" "${entry}";
+        fi
+    done
+
+}
+
 scanDatabaseTable() {
-    local domain table list_type querystr result extra
+    local domain table list_type querystr result extra abpquerystr abpfound abpentry searchstr
     domain="$(printf "%q" "${1}")"
     table="${2}"
     list_type="${3:-}"
@@ -104,9 +92,34 @@ scanDatabaseTable() {
     # behavior. The "ESCAPE '\'" clause specifies that an underscore preceded by an '\' should be matched
     # as a literal underscore character. We pretreat the $domain variable accordingly to escape underscores.
     if [[ "${table}" == "gravity" ]]; then
+
+        # Are there ABP entries on gravity?
+        # Return 1 if abp_domain=1 or Zero if abp_domain=0 or not set
+        abpquerystr="SELECT EXISTS (SELECT 1 FROM info WHERE property='abp_domains' and value='1')"
+        abpfound="$(pihole-FTL sqlite3 "${gravityDBfile}" "${abpquerystr}")" 2> /dev/null
+
+        # Create search string for ABP entries only if needed
+        if [ "${abpfound}" -eq 1 ]; then
+            abpentry="${domain}"
+
+            searchstr="'||${abpentry}^'"
+
+            # While a dot is found ...
+            while [ "${abpentry}" != "${abpentry/./}" ]
+            do
+                # ... remove text before the dot (including the dot) and append the result to $searchstr
+                abpentry=$(echo "${abpentry}" | cut -f 2- -d '.')
+                searchstr="$searchstr, '||${abpentry}^'"
+            done
+
+            # The final search string will look like:
+            # "domain IN ('||sub2.sub1.domain.com^', '||sub1.domain.com^', '||domain.com^', '||com^') OR"
+            searchstr="domain IN (${searchstr}) OR "
+        fi
+
         case "${exact}" in
             "exact" ) querystr="SELECT gravity.domain,adlist.address,adlist.enabled FROM gravity LEFT JOIN adlist ON adlist.id = gravity.adlist_id WHERE domain = '${domain}'";;
-            *       ) querystr="SELECT gravity.domain,adlist.address,adlist.enabled FROM gravity LEFT JOIN adlist ON adlist.id = gravity.adlist_id WHERE domain LIKE '%${domain//_/\\_}%' ESCAPE '\\'";;
+            *       ) querystr="SELECT gravity.domain,adlist.address,adlist.enabled FROM gravity LEFT JOIN adlist ON adlist.id = gravity.adlist_id WHERE ${searchstr} domain LIKE '%${domain//_/\\_}%' ESCAPE '\\'";;
         esac
     else
         case "${exact}" in
@@ -116,7 +129,7 @@ scanDatabaseTable() {
     fi
 
     # Send prepared query to gravity database
-    result="$(pihole-FTL sqlite3 "${gravityDBfile}" "${querystr}")" 2> /dev/null
+    result="$(pihole-FTL sqlite3 -separator ',' "${gravityDBfile}" "${querystr}")" 2> /dev/null
     if [[ -z "${result}" ]]; then
         # Return early when there are no matches in this table
         return
@@ -136,8 +149,8 @@ scanDatabaseTable() {
     # Loop over results and print them
     mapfile -t results <<< "${result}"
     for result in "${results[@]}"; do
-        domain="${result/|*}"
-        if [[ "${result#*|}" == "0" ]]; then
+        domain="${result/,*}"
+        if [[ "${result#*,}" == "0" ]]; then
             extra=" (disabled)"
         else
             extra=""
@@ -160,7 +173,7 @@ scanRegexDatabaseTable() {
         # Split regexps over a new line
         str_regexList=$(printf '%s\n' "${regexList[@]}")
         # Check domain against regexps
-        mapfile -t regexMatches < <(scanList "${domain}" "${str_regexList}" "regex")
+        mapfile -t regexMatches < <(scanRegExList "${domain}" "${str_regexList}")
         # If there were regex matches
         if [[  "${#regexMatches[@]}" -ne 0 ]]; then
             # Split matching regexps over a new line
@@ -212,10 +225,10 @@ if [[ -n "${exact}" ]]; then
 fi
 
 for result in "${results[@]}"; do
-    match="${result/|*/}"
-    extra="${result#*|}"
-    adlistAddress="${extra/|*/}"
-    extra="${extra#*|}"
+    match="${result/,*/}"
+    extra="${result#*,}"
+    adlistAddress="${extra/,*/}"
+    extra="${extra#*,}"
     if [[ "${extra}" == "0" ]]; then
         extra=" (disabled)"
     else

advanced/Scripts/utils.sh

@@ -57,7 +57,11 @@ addKey(){
   # touch file to prevent grep error if file does not exist yet
   touch "${file}"
 
-  if ! grep -q "^${key}" "${file}"; then
+  # Match key against entire line, using both anchors. We assume
+  # that the file's keys never have bounding whitespace. Anchors
+  # are necessary to ensure the key is considered absent when it
+  # is a substring of another key present in the file.
+  if ! grep -q "^${key}$" "${file}"; then
     # Key does not exist, add it.
     echo "${key}" >> "${file}"
   fi

advanced/Scripts/webpage.sh

@@ -22,12 +22,14 @@ readonly dnscustomcnamefile="/etc/dnsmasq.d/05-pihole-custom-cname.conf"
 
 readonly gravityDBfile="/etc/pihole/gravity.db"
 
-# Source install script for ${setupVars}, ${PI_HOLE_BIN_DIR} and valid_ip()
-readonly PI_HOLE_FILES_DIR="/etc/.pihole"
-# shellcheck disable=SC2034  # used in basic-install to source the script without running it
-SKIP_INSTALL="true"
-source "${PI_HOLE_FILES_DIR}/automated install/basic-install.sh"
 
+readonly setupVars="/etc/pihole/setupVars.conf"
+readonly PI_HOLE_BIN_DIR="/usr/local/bin"
+
+# Root of the web server
+readonly webroot="/var/www/html"
+
+# Source utils script
 utilsfile="/opt/pihole/utils.sh"
 source "${utilsfile}"
 
@@ -98,6 +100,47 @@ HashPassword() {
     echo "${return}"
 }
 
+# Check an IP address to see if it is a valid one
+valid_ip() {
+    # Local, named variables
+    local ip=${1}
+    local stat=1
+
+    # Regex matching one IPv4 component, i.e. an integer from 0 to 255.
+    # See https://tools.ietf.org/html/rfc1340
+    local ipv4elem="(25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[1-9][0-9]?|0)";
+    # Regex matching an optional port (starting with '#') range of 1-65536
+    local portelem="(#(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))?";
+    # Build a full IPv4 regex from the above subexpressions
+    local regex="^${ipv4elem}\\.${ipv4elem}\\.${ipv4elem}\\.${ipv4elem}${portelem}$"
+
+    # Evaluate the regex, and return the result
+    [[ $ip =~ ${regex} ]]
+
+    stat=$?
+    return "${stat}"
+}
+
+valid_ip6() {
+    local ip=${1}
+    local stat=1
+
+    # Regex matching one IPv6 element, i.e. a hex value from 0000 to FFFF
+    local ipv6elem="[0-9a-fA-F]{1,4}"
+    # Regex matching an IPv6 CIDR, i.e. 1 to 128
+    local v6cidr="(\\/([1-9]|[1-9][0-9]|1[0-1][0-9]|12[0-8])){0,1}"
+    # Regex matching an optional port (starting with '#') range of 1-65536
+    local portelem="(#(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))?";
+    # Build a full IPv6 regex from the above subexpressions
+    local regex="^(((${ipv6elem}))*((:${ipv6elem}))*::((${ipv6elem}))*((:${ipv6elem}))*|((${ipv6elem}))((:${ipv6elem})){7})${v6cidr}${portelem}$"
+
+    # Evaluate the regex, and return the result
+    [[ ${ip} =~ ${regex} ]]
+
+    stat=$?
+    return "${stat}"
+}
+
 SetWebPassword() {
     if [ "${SUDO_USER}" == "www-data" ]; then
         echo "Security measure: user www-data is not allowed to change webUI password!"
@@ -613,7 +656,6 @@ Teleporter() {
         host="${host//./_}"
         filename="pi-hole-${host:-noname}-teleporter_${datetimestamp}.tar.gz"
     fi
-    # webroot is sourced from basic-install above
     php "${webroot}/admin/scripts/pi-hole/php/teleporter.php" > "${filename}"
 }
 
@@ -622,7 +664,7 @@ checkDomain()
     local domain validDomain
     # Convert to lowercase
     domain="${1,,}"
-    validDomain=$(grep -P "^((-|_)*[a-z\\d]((-|_)*[a-z\\d])*(-|_)*)(\\.(-|_)*([a-z\\d]((-|_)*[a-z\\d])*))*$" <<< "${domain}") # Valid chars check
+    validDomain=$(grep -P "^((-|_)*[a-z0-9]((-|_)*[a-z0-9])*(-|_)*)(\\.(-|_)*([a-z0-9]((-|_)*[a-z0-9])*))*$" <<< "${domain}") # Valid chars check
     validDomain=$(grep -P "^[^\\.]{1,63}(\\.[^\\.]{1,63})*$" <<< "${validDomain}") # Length of each label
     echo "${validDomain}"
 }

advanced/Templates/gravity_copy.sql

@@ -19,8 +19,6 @@ INSERT OR REPLACE INTO adlist SELECT * FROM OLD.adlist;
 DELETE FROM OLD.adlist_by_group WHERE adlist_id NOT IN (SELECT id FROM OLD.adlist);
 INSERT OR REPLACE INTO adlist_by_group SELECT * FROM OLD.adlist_by_group;
 
-INSERT OR REPLACE INTO info SELECT * FROM OLD.info;
-
 INSERT OR REPLACE INTO client SELECT * FROM OLD.client;
 DELETE FROM OLD.client_by_group WHERE client_id NOT IN (SELECT id FROM OLD.client);
 INSERT OR REPLACE INTO client_by_group SELECT * FROM OLD.client_by_group;

advanced/lighttpd.conf.debian

@@ -7,13 +7,15 @@
 # This file is copyright under the latest version of the EUPL.
 # Please see LICENSE file for your rights under this license.
 
-###############################################################################
-#     FILE AUTOMATICALLY OVERWRITTEN BY PI-HOLE INSTALL/UPDATE PROCEDURE.     #
-# ANY CHANGES MADE TO THIS FILE AFTER INSTALL WILL BE LOST ON THE NEXT UPDATE #
-#                                                                             #
-#              CHANGES SHOULD BE MADE IN A SEPARATE CONFIG FILE:              #
-#                         /etc/lighttpd/external.conf                         #
-###############################################################################
+###################################################################################################
+#   IF THIS HEADER EXISTS, THE FILE WILL BE OVERWRITTEN BY PI-HOLE'S UPDATE PROCEDURE.            #
+#   ANY CHANGES MADE TO THIS FILE WILL BE LOST ON THE NEXT UPDATE UNLESS YOU REMOVE THIS HEADER   #
+#                                                                                                 #
+#   ENSURE THAT YOU DO NOT REMOVE THE REQUIRED LINE:                                              #
+#                                                                                                 #
+#   include "/etc/lighttpd/conf-enabled/*.conf"                                                   #
+#                                                                                                 #
+###################################################################################################
 
 server.modules = (
     "mod_access",

advanced/lighttpd.conf.fedora

@@ -7,13 +7,15 @@
 # This file is copyright under the latest version of the EUPL.
 # Please see LICENSE file for your rights under this license.
 
-###############################################################################
-#     FILE AUTOMATICALLY OVERWRITTEN BY PI-HOLE INSTALL/UPDATE PROCEDURE.     #
-# ANY CHANGES MADE TO THIS FILE AFTER INSTALL WILL BE LOST ON THE NEXT UPDATE #
-#                                                                             #
-#              CHANGES SHOULD BE MADE IN A SEPARATE CONFIG FILE:              #
-#                         /etc/lighttpd/external.conf                         #
-###############################################################################
+###################################################################################################
+#   IF THIS HEADER EXISTS, THE FILE WILL BE OVERWRITTEN BY PI-HOLE'S UPDATE PROCEDURE.            #
+#   ANY CHANGES MADE TO THIS FILE WILL BE LOST ON THE NEXT UPDATE UNLESS YOU REMOVE THIS HEADER   #
+#                                                                                                 #
+#   ENSURE THAT YOU DO NOT REMOVE THE REQUIRED LINE:                                              #
+#                                                                                                 #
+#   include "/etc/lighttpd/conf.d/pihole-admin.conf"                                              #
+#                                                                                                 #
+###################################################################################################
 
 server.modules = (
     "mod_access",

automated install/basic-install.sh

@@ -357,7 +357,7 @@ package_manager_detect() {
         # These variable names match the ones for apt-get. See above for an explanation of what they are for.
         PKG_INSTALL=("${PKG_MANAGER}" install -y)
         # CentOS package manager returns 100 when there are packages to update so we need to || true to prevent the script from exiting.
-        PKG_COUNT="${PKG_MANAGER} check-update | grep -E '(.i686|.x86|.noarch|.arm|.src)' | wc -l || true"
+        PKG_COUNT="${PKG_MANAGER} check-update | grep -E '(.i686|.x86|.noarch|.arm|.src|.riscv64)' | wc -l || true"
         OS_CHECK_DEPS=(grep bind-utils)
         INSTALLER_DEPS=(git dialog iproute newt procps-ng chkconfig ca-certificates)
         PIHOLE_DEPS=(cronie curl findutils sudo unzip libidn2 psmisc libcap nmap-ncat jq)
@@ -1409,7 +1409,7 @@ installConfigs() {
         mkdir -p /run/lighttpd
         chown ${LIGHTTPD_USER}:${LIGHTTPD_GROUP} /run/lighttpd
 
-        if grep -q -F "FILE AUTOMATICALLY OVERWRITTEN BY PI-HOLE" "${lighttpdConfig}"; then
+        if grep -q -F "OVERWRITTEN BY PI-HOLE" "${lighttpdConfig}"; then
             # Attempt to preserve backwards compatibility with older versions
             install -D -m 644 -T ${PI_HOLE_LOCAL_REPO}/advanced/${LIGHTTPD_CFG} "${lighttpdConfig}"
             # Make the directories if they do not exist and set the owners
@@ -2366,6 +2366,9 @@ get_binary_name() {
             # set the binary to be used
             l_binary="pihole-FTL-linux-x86_64"
         fi
+    elif [[ "${machine}" == "riscv64" ]]; then
+        printf "%b  %b Detected riscv64 processor\\n" "${OVER}" "${TICK}"
+        l_binary="pihole-FTL-riscv64-linux-gnu"
     else
         # Something else - we try to use 32bit executable and warn the user
         if [[ ! "${machine}" == "i686" ]]; then
@@ -2612,7 +2615,8 @@ main() {
 
         # Get the privacy level if it exists (default is 0)
         if [[ -f "${FTL_CONFIG_FILE}" ]]; then
-            PRIVACY_LEVEL=$(sed -ne 's/PRIVACYLEVEL=\(.*\)/\1/p' "${FTL_CONFIG_FILE}")
+            # get the value from $FTL_CONFIG_FILE (and ignoring all commented lines)
+            PRIVACY_LEVEL=$(sed -e '/^[[:blank:]]*#/d' "${FTL_CONFIG_FILE}" | grep "PRIVACYLEVEL" | awk -F "=" 'NR==1{printf$2}')
 
             # If no setting was found, default to 0
             PRIVACY_LEVEL="${PRIVACY_LEVEL:-0}"

automated install/uninstall.sh

@@ -193,6 +193,18 @@ removeNoPurge() {
         else
             service pihole-FTL stop
         fi
+        ${SUDO} rm -f /etc/systemd/system/pihole-FTL.service
+        if [[ -d '/etc/systemd/system/pihole-FTL.service.d' ]]; then
+            read -rp "  ${QST} FTL service override directory /etc/systemd/system/pihole-FTL.service.d detected. Do you wish to remove this from your system? [y/N] " answer
+            case $answer in
+                [yY]*)
+                    echo -ne "  ${INFO} Removing /etc/systemd/system/pihole-FTL.service.d..."
+                    ${SUDO} rm -R /etc/systemd/system/pihole-FTL.service.d
+                    echo -e "${OVER}  ${INFO} Removed /etc/systemd/system/pihole-FTL.service.d"
+                ;;
+                *) echo -e "  ${INFO} Leaving /etc/systemd/system/pihole-FTL.service.d in place.";;
+            esac
+        fi
         ${SUDO} rm -f /etc/init.d/pihole-FTL
         ${SUDO} rm -f /usr/bin/pihole-FTL
         echo -e "${OVER}  ${TICK} Removed pihole-FTL"

gravity.sh

@@ -52,6 +52,14 @@ else
   exit 1
 fi
 
+# Set up tmp dir variable in case it's not configured
+: "${GRAVITY_TMPDIR:=/tmp}"
+
+if [ ! -d "${GRAVITY_TMPDIR}" ] || [ ! -w "${GRAVITY_TMPDIR}" ]; then
+  echo -e "  ${COL_LIGHT_RED}Gravity temporary directory does not exist or is not a writeable directory, falling back to /tmp. ${COL_NC}"
+  GRAVITY_TMPDIR="/tmp"
+fi
+
 # Source pihole-FTL from install script
 pihole_FTL="${piholeDir}/pihole-FTL.conf"
 if [[ -f "${pihole_FTL}" ]]; then
@@ -121,7 +129,7 @@ gravity_swap_databases() {
   echo -e "${OVER}  ${TICK} ${str}"
 
   if $oldAvail; then
-    echo -e "  ${TICK} The old database remains available."
+    echo -e "  ${TICK} The old database remains available"
   fi
 }
 
@@ -145,7 +153,10 @@ database_table_from_file() {
   src="${2}"
   backup_path="${piholeDir}/migration_backup"
   backup_file="${backup_path}/$(basename "${2}")"
-  tmpFile="$(mktemp -p "/tmp" --suffix=".gravity")"
+  # Create a temporary file. We don't use '--suffix' here because not all
+  # implementations of mktemp support it, e.g. on Alpine
+  tmpFile="$(mktemp -p "${GRAVITY_TMPDIR}")"
+  mv "${tmpFile}" "${tmpFile%.*}.gravity"
 
   local timestamp
   timestamp="$(date --utc +'%s')"
@@ -216,20 +227,9 @@ database_table_from_file() {
     echo -e "  ${CROSS} Unable to remove ${tmpFile}"
 }
 
-# Update timestamp of last update of this list. We store this in the "old" database as all values in the new database will later be overwritten
-database_adlist_updated() {
-  output=$( { printf ".timeout 30000\\nUPDATE adlist SET date_updated = (cast(strftime('%%s', 'now') as int)) WHERE id = %i;\\n" "${1}" | pihole-FTL sqlite3 "${gravityDBfile}"; } 2>&1 )
-  status="$?"
-
-  if [[ "${status}" -ne 0 ]]; then
-    echo -e "\\n  ${CROSS} Unable to update timestamp of adlist with ID ${1} in database ${gravityDBfile}\\n  ${output}"
-    gravity_Cleanup "error"
-  fi
-}
-
 # Check if a column with name ${2} exists in gravity table with name ${1}
 gravity_column_exists() {
-  output=$( { printf ".timeout 30000\\nSELECT EXISTS(SELECT * FROM pragma_table_info('%s') WHERE name='%s');\\n" "${1}" "${2}" | pihole-FTL sqlite3 "${gravityDBfile}"; } 2>&1 )
+  output=$( { printf ".timeout 30000\\nSELECT EXISTS(SELECT * FROM pragma_table_info('%s') WHERE name='%s');\\n" "${1}" "${2}" | pihole-FTL sqlite3 "${gravityTEMPfile}"; } 2>&1 )
   if [[ "${output}" == "1" ]]; then
     return 0 # Bash 0 is success
   fi
@@ -244,11 +244,11 @@ database_adlist_number() {
     return;
   fi
 
-  output=$( { printf ".timeout 30000\\nUPDATE adlist SET number = %i, invalid_domains = %i WHERE id = %i;\\n" "${num_domains}" "${num_non_domains}" "${1}" | pihole-FTL sqlite3 "${gravityDBfile}"; } 2>&1 )
+  output=$( { printf ".timeout 30000\\nUPDATE adlist SET number = %i, invalid_domains = %i WHERE id = %i;\\n" "${2}" "${3}" "${1}" | pihole-FTL sqlite3 "${gravityTEMPfile}"; } 2>&1 )
   status="$?"
 
   if [[ "${status}" -ne 0 ]]; then
-    echo -e "\\n  ${CROSS} Unable to update number of domains in adlist with ID ${1} in database ${gravityDBfile}\\n  ${output}"
+    echo -e "\\n  ${CROSS} Unable to update number of domains in adlist with ID ${1} in database ${gravityTEMPfile}\\n  ${output}"
     gravity_Cleanup "error"
   fi
 }
@@ -260,11 +260,11 @@ database_adlist_status() {
     return;
   fi
 
-  output=$( { printf ".timeout 30000\\nUPDATE adlist SET status = %i WHERE id = %i;\\n" "${2}" "${1}" | pihole-FTL sqlite3 "${gravityDBfile}"; } 2>&1 )
+  output=$( { printf ".timeout 30000\\nUPDATE adlist SET status = %i WHERE id = %i;\\n" "${2}" "${1}" | pihole-FTL sqlite3 "${gravityTEMPfile}"; } 2>&1 )
   status="$?"
 
   if [[ "${status}" -ne 0 ]]; then
-    echo -e "\\n  ${CROSS} Unable to update status of adlist with ID ${1} in database ${gravityDBfile}\\n  ${output}"
+    echo -e "\\n  ${CROSS} Unable to update status of adlist with ID ${1} in database ${gravityTEMPfile}\\n  ${output}"
     gravity_Cleanup "error"
   fi
 }
@@ -401,7 +401,7 @@ gravity_DownloadBlocklists() {
     unset sources
   fi
 
-  local url domain agent cmd_ext str target compression
+  local url domain agent str target compression
   echo ""
 
   # Prepare new gravity database
@@ -418,7 +418,24 @@ gravity_DownloadBlocklists() {
     echo -e "${OVER}  ${TICK} ${str}"
   fi
 
-  target="$(mktemp -p "/tmp" --suffix=".gravity")"
+  str="Creating new gravity databases"
+  echo -ne "  ${INFO} ${str}..."
+
+  # Gravity copying SQL script
+  copyGravity="$(cat "${gravityDBcopy}")"
+  if [[ "${gravityDBfile}" != "${gravityDBfile_default}" ]]; then
+    # Replace default gravity script location by custom location
+    copyGravity="${copyGravity//"${gravityDBfile_default}"/"${gravityDBfile}"}"
+  fi
+
+  output=$( { pihole-FTL sqlite3 "${gravityTEMPfile}" <<< "${copyGravity}"; } 2>&1 )
+  status="$?"
+
+  if [[ "${status}" -ne 0 ]]; then
+    echo -e "\\n  ${CROSS} Unable to copy data from ${gravityDBfile} to ${gravityTEMPfile}\\n  ${output}"
+    return 1
+  fi
+  echo -e "${OVER}  ${TICK} ${str}"
 
   # Use compression to reduce the amount of data that is transferred
   # between the Pi-hole and the ad list provider. Use this feature
@@ -443,12 +460,6 @@ gravity_DownloadBlocklists() {
     # Default user-agent (for Cloudflare's Browser Integrity Check: https://support.cloudflare.com/hc/en-us/articles/200170086-What-does-the-Browser-Integrity-Check-do-)
     agent="Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/70.0.3538.102 Safari/537.36"
 
-    # Provide special commands for blocklists which may need them
-    case "${domain}" in
-      "pgl.yoyo.org") cmd_ext="-d mimetype=plaintext -d hostformat=hosts";;
-      *) cmd_ext="";;
-    esac
-
     echo -e "  ${INFO} Target: ${url}"
     local regex check_url
     # Check for characters NOT allowed in URLs
@@ -461,138 +472,14 @@ gravity_DownloadBlocklists() {
     if [[ "${check_url}" =~ ${regex} ]]; then
       echo -e "  ${CROSS} Invalid Target"
     else
-      gravity_DownloadBlocklistFromUrl "${url}" "${cmd_ext}" "${agent}" "${sourceIDs[$i]}" "${saveLocation}" "${target}" "${compression}"
+      gravity_DownloadBlocklistFromUrl "${url}" "${agent}" "${sourceIDs[$i]}" "${saveLocation}" "${target}" "${compression}"
     fi
     echo ""
   done
 
-  str="Creating new gravity databases"
-  echo -ne "  ${INFO} ${str}..."
-
-  # Gravity copying SQL script
-  copyGravity="$(cat "${gravityDBcopy}")"
-  if [[ "${gravityDBfile}" != "${gravityDBfile_default}" ]]; then
-    # Replace default gravity script location by custom location
-    copyGravity="${copyGravity//"${gravityDBfile_default}"/"${gravityDBfile}"}"
-  fi
-
-  output=$( { pihole-FTL sqlite3 "${gravityTEMPfile}" <<< "${copyGravity}"; } 2>&1 )
-  status="$?"
-
-  if [[ "${status}" -ne 0 ]]; then
-    echo -e "\\n  ${CROSS} Unable to copy data from ${gravityDBfile} to ${gravityTEMPfile}\\n  ${output}"
-    return 1
-  fi
-  echo -e "${OVER}  ${TICK} ${str}"
-
-  str="Storing downloaded domains in new gravity database"
-  echo -ne "  ${INFO} ${str}..."
-  output=$( { printf ".timeout 30000\\n.mode csv\\n.import \"%s\" gravity\\n" "${target}" | pihole-FTL sqlite3 "${gravityTEMPfile}"; } 2>&1 )
-  status="$?"
-
-  if [[ "${status}" -ne 0 ]]; then
-    echo -e "\\n  ${CROSS} Unable to fill gravity table in database ${gravityTEMPfile}\\n  ${output}"
-    gravity_Cleanup "error"
-  else
-    echo -e "${OVER}  ${TICK} ${str}"
-  fi
-
-  if [[ "${status}" -eq 0 && -n "${output}" ]]; then
-    echo -e "  Encountered non-critical SQL warnings. Please check the suitability of the lists you're using!\\n\\n  SQL warnings:"
-    local warning file line lineno
-    while IFS= read -r line; do
-      echo "  - ${line}"
-      warning="$(grep -oh "^[^:]*:[0-9]*" <<< "${line}")"
-      file="${warning%:*}"
-      lineno="${warning#*:}"
-      if [[ -n "${file}" && -n "${lineno}" ]]; then
-        echo -n "    Line contains: "
-        awk "NR==${lineno}" < "${file}"
-      fi
-    done <<< "${output}"
-    echo ""
-  fi
-
-  rm "${target}" > /dev/null 2>&1 || \
-    echo -e "  ${CROSS} Unable to remove ${target}"
-
   gravity_Blackbody=true
 }
 
-# num_total_imported_domains increases for each list processed
-num_total_imported_domains=0
-num_domains=0
-num_non_domains=0
-parseList() {
-  local adlistID="${1}" src="${2}" target="${3}" non_domains sample_non_domains tmp_non_domains_str false_positive
-  # This sed does the following things:
-  # 1. Remove all lines containing no domains
-  # 2. Remove all domains containing invalid characters. Valid are: a-z, A-Z, 0-9, dot (.), minus (-), underscore (_)
-  # 3. Append ,adlistID to every line
-  # 4. Remove trailing period (see https://github.com/pi-hole/pi-hole/issues/4701)
-  # 5. Ensures there is a newline on the last line
-  sed -r  "/([^\.]+\.)+[^\.]{2,}/!d;/[^a-zA-Z0-9.\_-]/d;s/\.$//;s/$/,${adlistID}/;/.$/a\\" "${src}" >> "${target}"
-
-  # Find lines containing no domains or with invalid characters (see above)
-  # Remove duplicates from the list
-  mapfile -t non_domains <<< "$(sed -r "/([^\.]+\.)+[^\.]{2,}/d" < "${src}")"
-  mapfile -t -O "${#non_domains[@]}" non_domains <<< "$(sed -r "/[^a-zA-Z0-9.\_-]/!d" < "${src}")"
-  IFS=" " read -r -a non_domains <<< "$(tr ' ' '\n' <<< "${non_domains[@]}" | sort -u | tr '\n' ' ')"
-
-  # A list of items of common local hostnames not to report as unusable
-  # Some lists (i.e StevenBlack's) contain these as they are supposed to be used as HOST files
-  # but flagging them as unusable causes more confusion than it's worth - so we suppress them from the output
-  false_positives=(
-    "localhost"
-    "localhost.localdomain"
-    "local"
-    "broadcasthost"
-    "localhost"
-    "ip6-localhost"
-    "ip6-loopback"
-    "lo0 localhost"
-    "ip6-localnet"
-    "ip6-mcastprefix"
-    "ip6-allnodes"
-    "ip6-allrouters"
-    "ip6-allhosts"
-    )
-
-  # Read the unusable lines into a string
-  tmp_non_domains_str=" ${non_domains[*]} "
-  for false_positive in "${false_positives[@]}"; do
-    # Remove false positives from tmp_non_domains_str
-    tmp_non_domains_str="${tmp_non_domains_str/ ${false_positive} / }"
-  done
-  # Read the string back into an array
-  IFS=" " read -r -a non_domains <<< "${tmp_non_domains_str}"
-
-  # Get a sample of non-domain entries, limited to 5 (the list should already have been de-duplicated)
-  IFS=" " read -r -a sample_non_domains <<< "$(tr ' ' '\n' <<< "${non_domains[@]}" | head -n 5 | tr '\n' ' ')"
-
-  local tmp_new_imported_total
-  # Get the new number of domains in destination file
-  tmp_new_imported_total="$(grep -c "^" "${target}")"
-  # Number of imported lines for this file is the difference between the new total and the old total. (Or, the number of domains we just added.)
-  num_domains="$(( tmp_new_imported_total-num_total_imported_domains ))"
-  # Replace the running total with the new total.
-  num_total_imported_domains="$tmp_new_imported_total"
-  # Get the number of non_domains (this is the number of entries left after stripping the source of comments/duplicates/false positives/domains)
-  num_non_domains="${#non_domains[@]}"
-
-  # If there are unusable lines, we display some information about them. This is not error or major cause for concern.
-  if [[ "${num_non_domains}" -ne 0 ]]; then
-    echo "  ${INFO} Imported ${num_domains} domains, ignoring ${num_non_domains} non-domain entries"
-    echo "      Sample of non-domain entries:"
-    for each in "${sample_non_domains[@]}"
-    do
-        echo "        - ${each}"
-    done
-  else
-    echo "  ${INFO} Imported ${num_domains} domains"
-  fi
-}
-
 compareLists() {
   local adlistID="${1}" target="${2}"
 
@@ -603,7 +490,6 @@ compareLists() {
       sha1sum "${target}" > "${target}.sha1"
       echo "  ${INFO} List has been updated"
       database_adlist_status "${adlistID}" "1"
-      database_adlist_updated "${adlistID}"
     else
       echo "  ${INFO} List stayed unchanged"
       database_adlist_status "${adlistID}" "2"
@@ -613,17 +499,18 @@ compareLists() {
     sha1sum "${target}" > "${target}.sha1"
     # We assume here it was changed upstream
     database_adlist_status "${adlistID}" "1"
-    database_adlist_updated "${adlistID}"
   fi
 }
 
 # Download specified URL and perform checks on HTTP status and file content
 gravity_DownloadBlocklistFromUrl() {
-  local url="${1}" cmd_ext="${2}" agent="${3}" adlistID="${4}" saveLocation="${5}" target="${6}" compression="${7}"
-  local heisenbergCompensator="" patternBuffer str httpCode success="" ip
+  local url="${1}" agent="${2}" adlistID="${3}" saveLocation="${4}" target="${5}" compression="${6}"
+  local heisenbergCompensator="" listCurlBuffer str httpCode success="" ip cmd_ext
 
   # Create temp file to store content on disk instead of RAM
-  patternBuffer=$(mktemp -p "/tmp" --suffix=".phgpb")
+  # We don't use '--suffix' here because not all implementations of mktemp support it, e.g. on Alpine
+  listCurlBuffer="$(mktemp -p "${GRAVITY_TMPDIR}")"
+  mv "${listCurlBuffer}" "${listCurlBuffer%.*}.phgpb"
 
   # Determine if $saveLocation has read permission
   if [[ -r "${saveLocation}" && $url != "file"* ]]; then
@@ -673,16 +560,16 @@ gravity_DownloadBlocklistFromUrl() {
     bad_list=$(pihole -q -adlist "${domain}" | head -n1 | awk -F 'Match found in ' '{print $2}')
     echo -e "${OVER}  ${CROSS} ${str} ${domain} is blocked by ${bad_list%:}. Using DNS on ${PIHOLE_DNS_1} to download ${url}";
     echo -ne "  ${INFO} ${str} Pending..."
-    cmd_ext="--resolve $domain:$port:$ip $cmd_ext"
+    cmd_ext="--resolve $domain:$port:$ip"
   fi
 
   # shellcheck disable=SC2086
-  httpCode=$(curl --connect-timeout ${curl_connect_timeout} -s -L ${compression} ${cmd_ext} ${heisenbergCompensator} -w "%{http_code}" -A "${agent}" "${url}" -o "${patternBuffer}" 2> /dev/null)
+  httpCode=$(curl --connect-timeout ${curl_connect_timeout} -s -L ${compression} ${cmd_ext} ${heisenbergCompensator} -w "%{http_code}" -A "${agent}" "${url}" -o "${listCurlBuffer}" 2> /dev/null)
 
   case $url in
     # Did we "download" a local file?
     "file"*)
-      if [[ -s "${patternBuffer}" ]]; then
+      if [[ -s "${listCurlBuffer}" ]]; then
         echo -e "${OVER}  ${TICK} ${str} Retrieval successful"; success=true
       else
         echo -e "${OVER}  ${CROSS} ${str} Not found / empty list"
@@ -711,24 +598,22 @@ gravity_DownloadBlocklistFromUrl() {
   if [[ "${success}" == true ]]; then
     if [[ "${httpCode}" == "304" ]]; then
       # Add domains to database table file
-      parseList "${adlistID}" "${saveLocation}" "${target}"
+      pihole-FTL gravity parseList "${saveLocation}" "${gravityTEMPfile}" "${adlistID}"
       database_adlist_status "${adlistID}" "2"
-      database_adlist_number "${adlistID}"
       done="true"
-    # Check if $patternbuffer is a non-zero length file
-    elif [[ -s "${patternBuffer}" ]]; then
+    # Check if $listCurlBuffer is a non-zero length file
+    elif [[ -s "${listCurlBuffer}" ]]; then
       # Determine if blocklist is non-standard and parse as appropriate
-      gravity_ParseFileIntoDomains "${patternBuffer}" "${saveLocation}"
+      gravity_ParseFileIntoDomains "${listCurlBuffer}" "${saveLocation}"
+      # Remove curl buffer file after its use
+      rm "${listCurlBuffer}"
       # Add domains to database table file
-      parseList "${adlistID}" "${saveLocation}" "${target}"
+      pihole-FTL gravity parseList "${saveLocation}" "${gravityTEMPfile}" "${adlistID}"
       # Compare lists, are they identical?
       compareLists "${adlistID}" "${saveLocation}"
-      # Update gravity database table (status and updated timestamp are set in
-      # compareLists)
-      database_adlist_number "${adlistID}"
       done="true"
     else
-      # Fall back to previously cached list if $patternBuffer is empty
+      # Fall back to previously cached list if $listCurlBuffer is empty
       echo -e "  ${INFO} Received empty file"
     fi
   fi
@@ -739,15 +624,12 @@ gravity_DownloadBlocklistFromUrl() {
     if [[ -r "${saveLocation}" ]]; then
       echo -e "  ${CROSS} List download failed: ${COL_LIGHT_GREEN}using previously cached list${COL_NC}"
       # Add domains to database table file
-      parseList "${adlistID}" "${saveLocation}" "${target}"
-      database_adlist_number "${adlistID}"
+      pihole-FTL gravity parseList "${saveLocation}" "${gravityTEMPfile}" "${adlistID}"
       database_adlist_status "${adlistID}" "3"
     else
       echo -e "  ${CROSS} List download failed: ${COL_LIGHT_RED}no cached list available${COL_NC}"
       # Manually reset these two numbers because we do not call parseList here
-      num_domains=0
-      num_non_domains=0
-      database_adlist_number "${adlistID}"
+      database_adlist_number "${adlistID}" 0 0
       database_adlist_status "${adlistID}" "4"
     fi
   fi
@@ -761,18 +643,26 @@ gravity_ParseFileIntoDomains() {
   # Most of the lists downloaded are already in hosts file format but the spacing/formatting is not contiguous
   # This helps with that and makes it easier to read
   # It also helps with debugging so each stage of the script can be researched more in depth
-  # 1) Remove carriage returns
-  # 2) Convert all characters to lowercase
-  # 3) Remove comments (text starting with "#", include possible spaces before the hash sign)
-  # 4) Remove lines containing "/"
-  # 5) Remove leading tabs, spaces, etc.
-  # 6) Remove empty lines
-  < "${src}" tr -d '\r' | \
-  tr '[:upper:]' '[:lower:]' | \
-  sed 's/\s*#.*//g' | \
-  sed -r '/(\/).*$/d' | \
-  sed -r 's/^.*\s+//g' | \
-  sed '/^$/d'>  "${destination}"
+  # 1) Convert all characters to lowercase
+  tr '[:upper:]' '[:lower:]' < "${src}" > "${destination}"
+
+  # 2) Remove carriage returns
+  # 3) Remove lines starting with ! (ABP Comments)
+  # 4) Remove lines starting with [ (ABP Header)
+  # 5) Remove lines containing ABP extended CSS selectors ("##", "#!#", "#@#", "#?#") preceded by a letter
+  # 6) Remove comments (text starting with "#", include possible spaces before the hash sign)
+  # 7) Remove leading tabs, spaces, etc. (Also removes leading IP addresses)
+  # 8) Remove empty lines
+
+    sed -i -r \
+    -e 's/\r$//' \
+    -e 's/\s*!.*//g' \
+    -e 's/\s*\[.*//g' \
+    -e '/[a-z]\#[$?@]{0,1}\#/d' \
+    -e 's/\s*#.*//g' \
+    -e 's/^.*\s+//g' \
+    -e '/^$/d' "${destination}"
+
   chmod 644 "${destination}"
 }
 
@@ -782,9 +672,9 @@ gravity_Table_Count() {
   local str="${2}"
   local num
   num="$(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT COUNT(*) FROM ${table};")"
-  if [[ "${table}" == "vw_gravity" ]]; then
+  if [[ "${table}" == "gravity" ]]; then
     local unique
-    unique="$(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT COUNT(DISTINCT domain) FROM ${table};")"
+    unique="$(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT COUNT(*) FROM (SELECT DISTINCT domain FROM ${table});")"
     echo -e "  ${INFO} Number of ${str}: ${num} (${COL_BOLD}${unique} unique domains${COL_NC})"
     pihole-FTL sqlite3 "${gravityDBfile}" "INSERT OR REPLACE INTO info (property,value) VALUES ('gravity_count',${unique});"
   else
@@ -794,7 +684,9 @@ gravity_Table_Count() {
 
 # Output count of blacklisted domains and regex filters
 gravity_ShowCount() {
-  gravity_Table_Count "vw_gravity" "gravity domains" ""
+  # Here we use the table "gravity" instead of the view "vw_gravity" for speed.
+  # It's safe to replace it here, because right after a gravity run both will show the exactly same number of domains.
+  gravity_Table_Count "gravity" "gravity domains" ""
   gravity_Table_Count "vw_blacklist" "exact blacklisted domains"
   gravity_Table_Count "vw_regex_blacklist" "regex blacklist filters"
   gravity_Table_Count "vw_whitelist" "exact whitelisted domains"
@@ -828,7 +720,10 @@ gravity_Cleanup() {
   # Delete tmp content generated by Gravity
   rm ${piholeDir}/pihole.*.txt 2> /dev/null
   rm ${piholeDir}/*.tmp 2> /dev/null
-  rm /tmp/*.phgpb 2> /dev/null
+  # listCurlBuffer location
+  rm "${GRAVITY_TMPDIR}"/*.phgpb 2> /dev/null
+  # invalid_domains location
+  rm "${GRAVITY_TMPDIR}"/*.ph-non-domains 2> /dev/null
 
   # Ensure this function only runs when gravity_SetDownloadOptions() has completed
   if [[ "${gravity_Blackbody:-}" == true ]]; then
@@ -991,7 +886,10 @@ if ! gravity_CheckDNSResolutionAvailable; then
   exit 1
 fi
 
-gravity_DownloadBlocklists
+if ! gravity_DownloadBlocklists; then
+  echo -e "   ${CROSS} Unable to create gravity database. Please try again later. If the problem persists, please contact support."
+  exit 1
+fi
 
 # Create local.list
 gravity_generateLocalList

pihole

@@ -24,7 +24,12 @@ utilsfile="${PI_HOLE_SCRIPT_DIR}/utils.sh"
 source "${utilsfile}"
 
 versionsfile="/etc/pihole/versions"
-source "${versionsfile}"
+if [ -f "${versionsfile}" ]; then
+    # Only source versionsfile if the file exits
+    # fixes a warning during installation where versionsfile does not exist yet
+    # but gravity calls `pihole -status` and thereby sourcing the file
+    source "${versionsfile}"
+fi
 
 webpageFunc() {
   source "${PI_HOLE_SCRIPT_DIR}/webpage.sh"

test/_fedora_38.Dockerfile

@@ -0,0 +1,18 @@
+FROM fedora:38
+RUN dnf install -y git initscripts
+
+ENV GITDIR /etc/.pihole
+ENV SCRIPTDIR /opt/pihole
+
+RUN mkdir -p $GITDIR $SCRIPTDIR /etc/pihole
+ADD . $GITDIR
+RUN cp $GITDIR/advanced/Scripts/*.sh $GITDIR/gravity.sh $GITDIR/pihole $GITDIR/automated\ install/*.sh $SCRIPTDIR/
+ENV PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:$SCRIPTDIR
+
+RUN true && \
+    chmod +x $SCRIPTDIR/*
+
+ENV SKIP_INSTALL true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
+
+#sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/_ubuntu_23.Dockerfile

@@ -0,0 +1,18 @@
+FROM buildpack-deps:lunar-scm
+
+ENV GITDIR /etc/.pihole
+ENV SCRIPTDIR /opt/pihole
+
+RUN mkdir -p $GITDIR $SCRIPTDIR /etc/pihole
+ADD . $GITDIR
+RUN cp $GITDIR/advanced/Scripts/*.sh $GITDIR/gravity.sh $GITDIR/pihole $GITDIR/automated\ install/*.sh $SCRIPTDIR/
+ENV PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:$SCRIPTDIR
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN true && \
+    chmod +x $SCRIPTDIR/*
+
+ENV SKIP_INSTALL true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
+
+#sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/requirements.txt

@@ -1,6 +1,6 @@
 docker-compose == 1.29.2
-pytest == 7.2.1
-pytest-xdist == 3.1.0
-pytest-testinfra == 7.0.0
-tox == 4.3.5
+pytest == 7.3.1
+pytest-xdist == 3.3.1
+pytest-testinfra == 8.1.0
+tox == 4.5.1
 

test/test_any_automated_install.py

@@ -1151,3 +1151,30 @@ def test_package_manager_has_web_deps(host):
 
     assert "No package" not in output.stdout
     assert output.rc == 0
+
+
+def test_webpage_sh_valid_domain(host):
+    """Confirms checkDomain function in webpage.sh works as expected"""
+    check1 = host.run(
+        """
+    source /opt/pihole/webpage.sh
+    checkDomain "pi-hole.net"
+    """
+    )
+    check2 = host.run(
+        """
+    source /opt/pihole/webpage.sh
+    checkDomain "ab.pi-hole.net"
+    """
+    )
+
+    check3 = host.run(
+        """
+    source /opt/pihole/webpage.sh
+    checkDomain "abc.pi-hole.net"
+    """
+    )
+
+    assert "pi-hole.net" in check1.stdout
+    assert "ab.pi-hole.net" in check2.stdout
+    assert "abc.pi-hole.net" in check3.stdout

test/test_any_utils.py

@@ -40,6 +40,26 @@ def test_key_addition_works(host):
     assert expected_stdout == output.stdout
 
 
+def test_key_addition_substr(host):
+    """Confirms addKey adds substring keys (no value) to a file"""
+    host.run(
+        """
+    source /opt/pihole/utils.sh
+    addKey "./testoutput" "KEY_ONE"
+    addKey "./testoutput" "KEY_O"
+    addKey "./testoutput" "KEY_TWO"
+    addKey "./testoutput" "Y_TWO"
+    """
+    )
+    output = host.run(
+        """
+    cat ./testoutput
+    """
+    )
+    expected_stdout = "KEY_ONE\nKEY_O\nKEY_TWO\nY_TWO\n"
+    assert expected_stdout == output.stdout
+
+
 def test_key_removal_works(host):
     """Confirms removeKey removes a key or key/value pair"""
     host.run(

test/tox.centos_8.ini

@@ -4,5 +4,5 @@ envlist = py3
 [testenv:py3]
 allowlist_externals = docker
 deps = -rrequirements.txt
-commands =  docker build -f _centos_8.Dockerfile -t pytest_pihole:test_container ../
+commands =  docker buildx build --load --progress plain -f _centos_8.Dockerfile -t pytest_pihole:test_container ../
             pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py ./test_centos_fedora_common_support.py ./test_centos_common_support.py

test/tox.centos_9.ini

@@ -4,5 +4,5 @@ envlist = py3
 [testenv:py3]
 allowlist_externals = docker
 deps = -rrequirements.txt
-commands = docker build -f _centos_9.Dockerfile -t pytest_pihole:test_container ../
+commands = docker buildx build --load --progress plain -f _centos_9.Dockerfile -t pytest_pihole:test_container ../
            pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py ./test_centos_fedora_common_support.py ./test_centos_common_support.py

test/tox.debian_10.ini

@@ -4,5 +4,5 @@ envlist = py3
 [testenv:py3]
 allowlist_externals = docker
 deps = -rrequirements.txt
-commands = docker build -f _debian_10.Dockerfile -t pytest_pihole:test_container ../
+commands = docker buildx build --load --progress plain -f _debian_10.Dockerfile -t pytest_pihole:test_container ../
            pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py

test/tox.debian_11.ini

@@ -4,5 +4,5 @@ envlist = py3
 [testenv:py3]
 allowlist_externals = docker
 deps = -rrequirements.txt
-commands = docker build -f _debian_11.Dockerfile -t pytest_pihole:test_container ../
+commands = docker buildx build --load --progress plain -f _debian_11.Dockerfile -t pytest_pihole:test_container ../
            pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py

test/tox.fedora_36.ini

@@ -4,5 +4,5 @@ envlist = py3
 [testenv:py3]
 allowlist_externals = docker
 deps = -rrequirements.txt
-commands = docker build -f _fedora_36.Dockerfile -t pytest_pihole:test_container ../
+commands = docker buildx build --load --progress plain -f _fedora_36.Dockerfile -t pytest_pihole:test_container ../
            pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py ./test_centos_fedora_common_support.py ./test_fedora_support.py

test/tox.fedora_37.ini

@@ -4,5 +4,5 @@ envlist = py3
 [testenv]
 allowlist_externals = docker
 deps = -rrequirements.txt
-commands = docker build -f _fedora_37.Dockerfile -t pytest_pihole:test_container ../
+commands = docker buildx build --load --progress plain -f _fedora_37.Dockerfile -t pytest_pihole:test_container ../
            pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py ./test_centos_fedora_common_support.py ./test_fedora_support.py

test/tox.fedora_38.ini

@@ -0,0 +1,8 @@
+[tox]
+envlist = py3
+
+[testenv]
+allowlist_externals = docker
+deps = -rrequirements.txt
+commands = docker buildx build --load --progress plain -f _fedora_38.Dockerfile -t pytest_pihole:test_container ../
+           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py ./test_centos_fedora_common_support.py ./test_fedora_support.py

test/tox.ubuntu_20.ini

@@ -4,5 +4,5 @@ envlist = py3
 [testenv:py3]
 allowlist_externals = docker
 deps = -rrequirements.txt
-commands = docker build -f _ubuntu_20.Dockerfile -t pytest_pihole:test_container ../
+commands = docker buildx build --load --progress plain -f _ubuntu_20.Dockerfile -t pytest_pihole:test_container ../
            pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py

test/tox.ubuntu_22.ini

@@ -4,5 +4,5 @@ envlist = py3
 [testenv:py3]
 allowlist_externals = docker
 deps = -rrequirements.txt
-commands = docker build -f _ubuntu_22.Dockerfile -t pytest_pihole:test_container ../
+commands = docker buildx build --load --progress plain -f _ubuntu_22.Dockerfile -t pytest_pihole:test_container ../
            pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py

test/tox.ubuntu_23.ini

@@ -0,0 +1,8 @@
+[tox]
+envlist = py3
+
+[testenv:py3]
+allowlist_externals = docker
+deps = -rrequirements.txt
+commands = docker buildx build --load --progress plain -f _ubuntu_23.Dockerfile -t pytest_pihole:test_container ../
+           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py